beautypg.com

5 testing sensors, Testing sensors – Campbell Scientific OBS-5+ Sediment Concentration Monitor and Pressure Sensor User Manual

Page 20

background image

OBS-5+ System

adjustment takes two seconds. If your PC is set to the wrong rate for some
reason, use the check box to select ONLY change host computer port. Then

click Apply and the

OBS Settings button.

If you get the OBS-5+ information box, the baud rate of the unit is
synchronized with your PC. If you don’t get an information box, repeat the
above procedure until communication is established.

6.2.5 Testing Sensors

1) Before daily operations and deployments, verify that the instrument works

by clicking

Open Plot, and then clicking

Survey. Select all

sensors and click Start Survey. An example plot of data is shown below.

12