Appendices a, Figures – Campbell Scientific CS475, CS476, and CS477 Radar Water Level Sensor User Manual
Page 6

Table of Contents
Check Unit Response ................................................................. 22
Check for Valid Data.................................................................. 22
Cyclic Redundancy Check ......................................................... 23
Check CRC for Valid Data .............................................. 23
Get Units .................................................................................... 24
Get Water Conditions................................................................. 24
Get Power Operation Mode........................................................ 24
Diagnostics and Repair...................................................................... 25
No Measured Value Available — Error E013............................ 25
No Measured Value Available — Error E041, E042, E043....... 25
Exchange Electronics Module ......................................... 25
Appendices
Replacing the Cable................................................A-1
SDI-12 Commands/ Changing Settings.................B-1
Descriptions....................................................... B-3
Echo Learn ............................................................. B-3
Water Stage ........................................................................ B-3
the Address.............................................................. B-3
Units ................................................................................... B-4
Conditions ............................................................... B-4
Operation Mode ...................................................... B-5
Using Terminal Emulator and a Datalogger to Send Commands.... B-6
Transparent Mode........................................................ B-6
B.2.2 CR200(X) Series Datalogger Example .................................... B-7
Datalogger Example................................................... B-8
Datalogger Example.................................................... B-9
Datalogger Example....................... B-10
FCC/IC Equipment Authorization (USA/Canada
only) .......................................................................C-1
Figures
4-1. Polarization markings (see TABLE 4-4 for label descriptions)........... 4
5-1. CS475, CS476, and CS477.................................................................. 9
5-2. Components and hardware (see TABLE 5-1 for description of
6-1. Reference line for measurement range .............................................. 11
dimensions............................................................................. 13
6-3. CS476/CS477 dimensions ................................................................. 14
8-1. Changing the electronics (see TABLE 8-5 for label descriptions) .... 27
A-1. Connecting the instrument housing (see TABLE A-1 for
description of labels).................................................................... A-2
B-2. SDI-12 transparent mode on CR200(X)-series datalogger using
B-3. SDI-12 transparent mode on CR1000 datalogger using control
port 1 and changing SD1-12 address from 3 to 1......................... B-8
ii