Performing a firmware update – Campbell Scientific CS125 Present Weather Sensor User Manual
Page 47
User Guide
39
This part of the test will take approximately two minutes. Every ten seconds a dot
should appear indicating that the test is progressing as normal.
Once the second stage of the test has been completed the new calibration constants
will be saved automatically. All calibration constants including both the user and
the factory setting can be viewed from menu item 4 from the main menu once the
test is completed.
17. Performing a firmware update
Firmware updates for the CS125 present weather sensor are performed using
Campbell Scientifics Device Configuration Utility (DevConfig) software. Please
refer to the help built into the DevConfig software for full instructions on how to
update the CS125 firmware.
Starting light level calibration.
This test will take approximately two minutes.
Calibration is now complete.
Saving user settings
Press any key to exit.