Asus A8N32-SLI - Manual (Page 154)

A S U S A 8 N 3 2 - S L I D e l u x e A S U S A 8 N 3 2 - S L I D e l u x e A S U S A 8 N 3 2 - S L I D e l u x e A S U S A 8 N 3 2 - S L I D e l u x e A S U S A 8 N 3 2 - S L I D e l u x e 5 - 4 1 5 - 4 1 5 - 4 1 5 - 4 1 5 - 4 1
5.5 Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows ®
2000/XP operating system on a hard disk drive that is included in a RAID
set.
To create a RAID driver disk:
1. Place the motherboard support CD into the CD-ROM drive.
2. Select M a k e D i s k M a k e D i s k M a k e D i s k M a k e D i s k M a k e D i s k tab.
3. From the M a k e D i s k M a k e D i s k M a k e D i s k M a k e D i s k M a k e D i s k menu, select the RAID driver disk you want to
create or browse the contents of the support CD to locate the driver
disk utility.
Refer to section “5.2.4 Make Disk menu” for details.
4. Insert floppy disk to floppy disk drive.
5. Follow succeeding screen information to complete process.
6. Write-protect the floppy disk to avoid computer virus infection.
To install the RAID driver:
1. During the OS installation, the system prompts you to press the F6
key to install third-party SCSI or RAID driver.
2. Press then insert the floppy disk with RAID driver into the floppy
disk drive.
3. Follow the succeeding screen instructions to complete the installation.
Due to chipset limitation, the Serial ATA ports supported by the NVIDIA
chipset doesn’t support Serial Optical Disk Drives (Serial ODD) under
DOS.