Asus A8N32-SLI - Manual (Page 110)

4 - 4 2 4 - 4 2 4 - 4 2 4 - 4 2 4 - 4 2 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
Discard Changes & Exit Discard Changes & Exit Discard Changes & Exit Discard Changes & Exit Discard Changes & Exit
Select this option only if you do not want to save the changes that you
made to the Setup program. If you made changes to fields other than
System Date, System Time, and Password, the BIOS asks for a confirmation
before exiting.
Discard Changes Discard Changes Discard Changes Discard Changes Discard Changes
Allows you to discard the selections you made and restore the previously
saved values. After selecting this option, a confirmation appears. Select O k
O k O k O k O k
to discard any changes and load the previously saved values.
Save Changes & Exit Save Changes & Exit Save Changes & Exit Save Changes & Exit Save Changes & Exit
Once you are finished making your selections, choose this option from the
Exit menu to ensure the values you selected are saved to the CMOS RAM.
An onboard backup battery sustains the CMOS RAM so it stays on even
when the computer is turned off. When you select this option, a
confirmation window appears. Select O k
O k O k O k O k to save the changes and exit.
If you attempt to exit the Setup program without saving your changes,
the program prompts you with a message asking if you want to save
your changes before exiting. Press to save the changes while
exiting.
Pressing does not immediately exit this menu. Select one of the
options from this menu or from the legend bar to exit.
4.7 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values
for the BIOS items, and save or discard your changes to the BIOS items.
V00.00 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Power Boot Exit
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Setup Defaults
→← →← →← →← →← Select Screen
↑↓ ↑↓ ↑↓ ↑↓ ↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.