Asus A8N32-SLI - Manual (Page 151)

5 - 3 8 5 - 3 8 5 - 3 8 5 - 3 8 5 - 3 8 C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
c. Repeat step b to select the target drive.
d. After selecting the
source and target
drives, the following
pop-up menu
appears.
M a n u a l c o n f i g u r a t i o n M a n u a l c o n f i g u r a t i o n M a n u a l c o n f i g u r a t i o n M a n u a l c o n f i g u r a t i o n M a n u a l c o n f i g u r a t i o n
a. Select M a n u a l
M a n u a l M a n u a l M a n u a l M a n u a l
c o n f i g u r a t i o n c o n f i g u r a t i o n c o n f i g u r a t i o n c o n f i g u r a t i o n c o n f i g u r a t i o n and press
. The selection
bar moves to the Physical
Drives menu.
b. Using the up or down arrow
keys, select the source drive
and press .
3. Select your desired method of configuration.
A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n
a. Select Auto Configuration then press .
b. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press .
c. Press to confirm or to return to the Main Menu.
• Auto-configuration creates a RAID 1 set without a backup copy of
the current source disk data.
• When migrating a single hard disk drive to a RAID 1 set, use of the
Manual configuration is recommended.
MAIN MENU
Auto configuration
Manual configuration
Create with data copy
Create without data copy
• The C r e a t e w i t h d a t a c o p y C r e a t e w i t h d a t a c o p y C r e a t e w i t h d a t a c o p y C r e a t e w i t h d a t a c o p y C r e a t e w i t h d a t a c o p y option allows you to copy the
current data from the source drive to the mirror drive.
• Select C r e a t e w i t h d a t a c o p y C r e a t e w i t h d a t a c o p y C r e a t e w i t h d a t a c o p y C r e a t e w i t h d a t a c o p y C r e a t e w i t h d a t a c o p y if you have important data in
your source drive.
• The C r e a t e w i t h o u t d a t a c o p y C r e a t e w i t h o u t d a t a c o p y C r e a t e w i t h o u t d a t a c o p y C r e a t e w i t h o u t d a t a c o p y C r e a t e w i t h o u t d a t a c o p y option disables the disk copy
function of the Mirrored set.
• If you selected C r e a t e w i t h o u t d a t a c o p y C r e a t e w i t h o u t d a t a c o p y C r e a t e w i t h o u t d a t a c o p y C r e a t e w i t h o u t d a t a c o p y C r e a t e w i t h o u t d a t a c o p y, the RAID 1 set must
be repartitioned and reformatted to guarantee the consistency of its
contents.