Raid cache, Removing the raid cache – Acer Altos R910 Series User Manual
Page 91
81
5
Align then insert the activation key into the RAID activation key
connector on the mainboard. .
6
Replace the memory board air baffle.
7
Replace the PCI card.
8
Observe the post-installation instructions described on page 34.
RAID cache
The RAID cache serves as memory for the storage I/O processor and as a
disk cache to store write data to drives.
Removing the RAID cache
1
Observe the ESD precautions and pre-installation instructions
described on page 33.
2
Remove the memory boards or memory air baffles from DIMM
slots C and D. See “Cold Removal of Memory Board” on page 70
and “Removing a memory board air baffle” on page 42.
3
Press the holding clips on both sides of the slot outward to release
the RAID cache (A).
4
Gently pull the RAID cache upward to remove it from the slot (B).