Acer Altos R910 Series User Manual
Page 143
133
Server boot does not complete POST
Do the following:
•
Make sure the VRMs are plugged in and the pins are not bent.
•
Make sure the CPU is properly seated.
•
Check the BIOS release notes to ensure the BIOS installed on the
platform supports the stepping and the family of processors
currently installed.
•
Make sure the memory boards are populated according to system
requirements.
Server does not recognize all of the processors installed
Do the following:
•
Make sure the VRMs are plugged in and the pins are not bent.
•
Make sure the CPU is properly seated.
HDD activity indicator does not light.
Do the following:
•
Make sure the drive is not disabled in the BIOS setup utility.
•
Make sure the drive’s power and data cables are connected
correctly.
•
Make sure the drive is compatible.
•
Make sure you have not exceeded the power budget for the
server.
•
If using SCSI drives, make sure that each SCSI ID number is unique
on the SCSI bus. See your drive documentation for details on
setting the SCSI ID for your drives.
•
If using a RAID configuration with SCSI drives, make sure the RAID
card is installed correctly.
If you have installed one or more hard drives in the system, do the
following:
•
Make sure the power and signal cables are connected correctly.