The cooking time has elapsed, Note, Rapid heating – Siemens HC744540 User Manual

Page 84: Set the function selector to i, After rapid heating has completed, Setting the clock, Setting the timer, Press the s timer button. the s symbol flashes

Use the + button to set a later end time.
The setting is adopted after a few seconds.
The end time is shown in the display until the oven starts.

The cooking time has elapsed
A signal sounds. The oven switches off. Press the

button

twice and switch off the function selector.

Note: You can make changes as long as the symbol is

flashing. When the symbol lights up, the setting has been
adopted.

Rapid heating

With rapid heating, the oven reaches the temperature selected

particularly quickly.
Use rapid heating for temperatures above 100 ºC.
To ensure even cooking of your food, only place the food in the
oven after rapid heating has completed.

Set the function selector to

Set the temperature selector to the desired temperature.

The indicator light above the temperature selector lights up.
The oven heats up.

After rapid heating has completed
The indicator light goes out. Place your dish in the oven and
select the desired type of heating.

Setting the clock

When the appliance is connected for the first time or after a
power cut, the

symbol and three zeros flash in the display.

Set the clock. The function selector must be switched off.

Setting procedure

Press the

Clock button.

12.00 appears in the display and the

symbol flashes.

Use the + or - button to change the clock.
After a few seconds, the time is saved. The

symbol goes

out.

Changing from summer to winter time, for example
Press the

Clock button twice and change the time using the

+ or - button.

Setting the timer

You can use the timer as a kitchen timer. It runs independently

of the oven. The timer has a special signal. This means that you
can tell whether the timer duration or the cooking time has
elapsed. You can also set the timer if the childproof lock is

active.
Setting procedure

Press the

Timer button.

The

symbol flashes.

Use the - or + button to change the timer duration.
Default value for + button = 10 minutes
Default value for - button = 5 minutes

The timer starts after a few seconds. The

symbol lights up in

the display. You will see the time counting down.

When the time has elapsed
A signal sounds. Press the

Timer button. The timer goes out.

Changing the timer duration
Press the

Timer button. Use the + or - button to change the

time.
Cancelling the setting
Press the

Timer button. Press the - button until zero is shown

on the display.
The timer and cooking time count down at the same time
Both symbols light up. You can see the timer duration counting

down in the display.
To call up the

remaining cooking time,

end time or

clock:

Press the

Clock button repeatedly until the relevant symbol

appears.
The value you are checking appears for several seconds on the

display.

FOHDQ

PLQ