Siemens GS36DPI20 - Manual (Page 38)

en
38
Switching on again:
1. Switch on water supply again.
2. Press ice dispenser On/Off button 1
for one second. The button is lit when
the ice dispenser is switched on.
Ice cube production restarts.
It takes at least 2 hours until new ice
cubes are available.
Note
Do not use the first 30-40 ice cubes
for reasons of hygiene.
Switching button lock on/off
Fig. &
The button lock prevents the appliance
from being operated unintentionally.
Press button lock button 2 for three
seconds. The button is lit when
the button lock is switched on.
Interior fittings
(not all models)
Frozen food container (large)
Fig. !/12
For the storage of large frozen items,
e.g. turkey, duck and goose.
Ice pack
Fig. !/13
If a power failure or malfunction occurs,
the ice packs can be used to slow down
the thawing process. The longest
storage time is obtained by placing
the ice pack on the food in the top
compartment.
The ice packs can also be used to cool
food temporarily, e.g. in a cold bag.
Switching off and
disconnecting the
appliance
Switching off the appliance
Fig. "
Press the On/Off button 1.
Temperature display goes out,
refrigerating unit switches off.
Disconnecting the appliance
If you do not use the appliance for
a prolonged period:
1. Before switching off, it is most
important that you switch the water
supply to the appliance off for a few
hours.
m
Caution
The ice maker must remain switched
on until the appliance is finally
switched off!
2. Remove ice cube container, empty
and then re-insert (see “Ice
dispenser”).
3. Wait several hours until any ice cubes
still in the ice maker have been
dispensed into the ice cube container.
4. Remove ice cube container again,
empty, clean and then re-insert (see
“Ice dispenser”).
5. Switch off the appliance.
6. Pull out mains plug or switch off fuse.
7. Empty and clean the ice cube
container (see chapter “Cleaning
the appliance”).
8. Clean the appliance.
9. Leave the appliance door open.