beautypg.com

Matrix Orbital VFD2041 Legacy User Manual

Page 7

background image

Figure 3: Power Connector

Table 2: Connector Pinout

Pin 4

Ground

Pin 3

SDA (I

2

C data) / Rx

Pin 2

SCL (I

2

C clock) / Tx

Pin 1

Vdc

2.1.2 Five Volt Modules

If the display is used in a PC it then becomes tempting to plug a spare power connector into the unit.

Don’t do this! Wiring for the PC power connector and that required for the display are different, as shown

in the Figure below.

Figure 4: Wiring for 5V Modules

Matrix Orbital can supply an adapter cable designed for use with the display when it’s installed in a PC.

The cable is wired as shown in the Figure below.

NOTE This cable does not provide connections for I

2

C.

Matrix Orbital

VFD2041

4

See also other documents in the category Matrix Orbital Hardware: