Aalborg TPV - Manual (Page 17)

17
3.3 Installing the Pump
Place the pump on a stable, even surface, and position it so
the pump head and controls are easily accessible to the user.
CAUTION:
AFTER THE TUBING IS LOADED BUT
BEFORE THE PUMP IS PRIMED OR RUN, REST THE
PUMP SQUARELY ON ITS 4 RUBBER FEET, TO
PREVENT LIQUID DRIPPING INTO THE PUMP HEAD OR ONTO
THE CONTROLS.
Once the pump has been primed, if desired, you can rotate the
handle underneath the pump to serve as a base. If needed,
tighten the screws that hold the handle to the pump body, so
the handle will not slip from the designated position.