Aalborg PWE Digital - Manual (Page 72)

67
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
Pilot To
talizer
Sets and controls action of the Pilot flow totalizer
.
NOTE: Pilot T
o
talizer reading is
stored in SRAM (volatile) memor
y. Power cycle will
reset Pilot T
o
talizer reading
to zero.
10
PT
Z (Reset to zero)
PTZ
F (start totalizer at flow %F
.S.)
(flow %FS)
PTF:
L (Limit gas volume in current E.U.)
(gas volume)
PTL:
D (disable totalizer)*
PT
:D
E (enable totalizer)
PT
:E
R (read current totalizer volume)
PTR: (in current EU)
S (setting status)
PTS: Mode, Start, Limit
Low Flow Cut Off
Display /Change Meter Low Flow Cut Off settings in %F
.S.
11
CO
alue>
(0 to 10.0%)
CO:
alue>
Example: CO:2.0
No Argument (Returns Current Cut off V
alue
settings)
CO:
alue>
Example: CO:2.0
Fluid Density
Read and set Fluid Density in g/cm3
12
FD
(New Density V
alue) 0.01
Density
5.0
g/cm3
FD:
No Argument (Returns Current Density in g/cm3)
FD: Example: FD:1.000