Aalborg PWE Digital - Manual (Page 70)

65
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
Te
mperature
Alarms**
Sets / reads the status of the temperature alarms. Note: High and Low limits have to be entered in the
°C.
High alarm value has to be more than Low alarm value. Alarm conditions: Temp. > High Limit = H Temp. < Low Limit = L Low < T
emp. < High = N
7
TA
H (high flow limit)
alue>
(-10.1-100
°C)
TA
H:
alue (
°C)>
L (low flow limit)
alue>
(-10.1-100
°C)
TA
L:
alue (
°C)>
A (action delay in seconds)
alue> (0-3600
sec.)
TAA:
alue (sec)>
E (enable alarm)
TA
:E
D (disable alarm)*
TA
:D
R (read current status)
TA
:N (no alarm)
TA
:H (high alarm)
TA
: L (low alarm)
S (Read current settings)
TAS:M,L,H,D,B where: M – mode (E/D) L – Low settings (
°C)
H – High settings (
°C)
D – Action Delay (sec) B – Latch mode (0-3)
B
B
lo
ck
(
L
at
ch
)
mode
alue>
(0-disabled*) (1-enabl’d L) (2-enabl’d H) (3 –both L,H)
TAB:
alue> where:
V
alue = 0 – 3