MagTek iDynamo MagneSafe V5 - Manual (Page 35)

Section 2. Communications
29
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled for these changes to take effect.
0 – send out masked AAMVA card data
1 – send out clear AAMVA card data
Example Set Send Clear AAMVA Card Data property Request (Hex):
Cmd Num Data Len Prp ID Data
01 06 34 01 xx xx xx xx *
* where “xx xx xx xx” is the MAC.
Example Set Send Clear AAMVA Card Data property Response (Hex):
Result Code Data Len Data
00 00
Example Get Send Clear AAMVA Card Data property Request (Hex):
Cmd Num Data Len Prp ID
00 01 34
Example Get Send Clear AAMVA Card Data property Response (Hex):
Result Code Data Len Data
00 01 01
Bundle Seed ID String Property
Property ID: 0x50
Property Type: String
Length: 10 bytes
Get Property: Yes
Set Property: Yes
Default Value: The default value W9342QFNVM.
Description: The value is an ASCII string that represents the reader BundleSeedID string.
This string is always 10 bytes long.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled for these changes to take effect.
Example Set BundeSeedID String property Request (Hex):
Cmd Num Data Len Prp ID Prp Value
01 0B 50 57 39 34 32 51 46 4E 56 4D
Example Set BundeSeedID String property Response (Hex):
Result Code Data Len Data
00 00
Example Get BundeSeedID String property Request (Hex):
Cmd Num Data Len Prp ID
00 01 50