MagTek iDynamo MagneSafe V5 - Manual (Page 21)

Section 2. Communications
15
Example Set Device Serial Number property Response (Hex):
Result Code Data Len Data
00 00
Example Get Device Serial Number property Request (Hex):
Cmd Num Data Len Prp ID
00 01 03
Example Get Device Serial Number property Response (Hex):
Result Code Data Len Prp Value
00 03 31 32 33
MagneSafe Version Number Property
Property ID: 0x04
Property Type: String
Length: 0 – 7 bytes
Get Property: Yes
Set Property: No
Default Value: “V05” (may change later)
Description: This is a maximum 7-byte read-only property that identifies the MagneSafe
Feature Level supported on this reader. Attempts to set this property will fail
with RC=01.
Example Get MagneSafe Version Number property Request (Hex):
Cmd Num Data Len Prp ID
00 01 04
Example Get MagneSafe Version Number property Response (Hex):
Result Code Data Len Prp Value
00 02 56 30 35
Track ID Enable Property
Property ID: 0x05
Property Type: Byte
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default Value: 0x95
Description: This property is defined as follows:
id 0 T
3
T
3
T
2
T
2
T
1
T
1
Id 0 – Decodes standard ISO/ABA cards only
1 – Decodes AAMV and 7-bit cards also
If this flag is set to 0, only tracks that conform to the ISO format allowed for that
track will be decoded. If the track cannot be decoded by the ISO method it will
be considered to be in error.
T
#
00 – Track Disabled