MagTek iDynamo - Manual (Page 9)

2 - Installation
iDynamo| MagneSafe Secure Card Reader Authenticator | Technical Reference Manual
Page 9
2 Installation
2.1 How to Install iDynamo and Software the First Time
To connect iDynamo to your selected iOS device for the first time, follow these steps:
1) Power on the iOS device.
2) Select the appropriate iDynamo adapter sleeve as indicated in section 1.3.2 Choose Adapters /
Accessories, optionally using the dimensions and shapes shown in Appendix B for reference. For
iPod Touch 3rd Generation and 4th Generation, attach the iPod Touch clip to the iPhone 3G/3GS
sleeve, oriented so the appropriate iPod Touch generation name is visible. Refer to Appendix B
iDynamo Adapters for detailed illustrations.
3) Connect the adapter sleeve to the iDynamo.
4) Connect the adapted iDynamo to the iOS device. Make sure all components are seated firmly.
5) After a few seconds, the iOS device will pop up an “App Not Installed” window. Press the App
Store button to open the App Store and browse all compatible applications.
6) Select and install QwickPAY as you would any iOS app.
7) Run QwickPAY and follow the instructions found in the QwickPAY documentation.