MagTek iDynamo - Manual (Page 24)

Appendix C - Troubleshooting
iDynamo| MagneSafe Secure Card Reader Authenticator | Technical Reference Manual
Page 24

Check the connectors on iDynamo, the iOS device, and cable to make sure they are not dirty or
damaged.
C.4 iOS Device Not Synchronizing
If the connected iOS device is not synchronizing through the pass-through Micro-USB port, check the
following:

Be aware that iOS devices cannot synchronize through iDynamo using the Apple Lightning
connector. They can only charge.

Follow the troubleshooting procedures in section C.3 iOS Device Not Charging.