MagTek MINI MICR USB - Manual (Page 9)

1
SECTION 1. OVERVIEW
The MINI MICR USB With Optional 3-Track MSR is both a MICR (Magnetic Ink Character
Recognition) Check Reader and an MSR (Magnetic Stripe Reader).
The MICR Reader, in a typical application, reads the magnetic data encoded on the bottom of
checks or magnetic stripe cards and transmits this data to a Host device. The Host device then
uses a specific authorization or verification process to validate a business transaction.
The use of the MICR Reader improves accuracy and speed because there is no manual data
entry; therefore there are no keying errors or unwanted delays.
The MICR Reader will communicate with the Host system using a standard USB interface. The
driver will emulate a serial port on the host PC. All data is transmitted as ASCII characters (See
Appendix D).
FEATURES
•
Available with MICR Reader only or with 3-Track or 2-Track MSR.
•
Three track MSR autodiscriminates different card formats: ISO (International Standards
Organization), CDL (California Drivers License), or AAMVA (American Association of
Motor Vehicle Administrators).
•
Small footprint.
•
Automatic parsing of MICR fields: transit, account, etc.
•
Extensive list of formats to transmit MICR data.
•
Optional error/status reporting for check reading.
•
Reads E13-B and CMC-7 MICR fonts.
•
EMF noise detection
•
In addition to the USB interface, the MICR Reader is also available with other interfaces.
ACCESSORIES
Accessories available for the MICR Reader are as follows:
•
MagTek Device Drivers for Windows, Part Number 30037385
•
MagTek Device Drivers for Windows, Programming Reference Manual, Part Number
99875125
•
Interface Cable, 9-pin Mini Din, Male, USB A Plug, 6’, Beige, Part Number 22517582, or
•
Interface Cable, 9-pin Mini Din, Male, USB A Plug, 6’, MT Gray, Part Number 22517583
•
AC Power Adapter with Cable, 120VAC to 12 VAC, 1 Amp, Part Number 64300050
•
MICRbase Program, Part Number 22000021
•
MICRbase, Setup Program for MICR Readers, Programming Reference Manual, P/N
99875102