MagTek MINI MICR USB - Manual (Page 26)

MINI MICR USB with 3-Track MSR
18
SA - SAVE COMMAND
All changes are considered temporary until the Save command is executed. The Save command
saves all changes to the MICR Reader memory and makes them permanent. The MICR Reader
will execute the command but it will not reply. To execute, send the SA command followed by a
carriage return as follows:
SA
RS - RESET COMMAND
The Reset command resets the MICR firmware to the normal operating state of waiting for a
check or card to be read. The command also resets the serial port to the most recent settings
provided by the SWA command. To execute, send the RS command followed by a carriage return
as follows:
RS