User supplied, Specifications – MagTek InSpec 9000-2005 User Manual
Page 12

InSpec 9000-2005 Encoded Card Tester
2
User supplied
The recommended minimum requirements are as follows:
•
Pentium Computer System
•
VGA color monitor (resolution 800 x 600 pixels or higher)
•
256 MB RAM
•
11MB of hard disk space
•
1 RS-232 Serial Port and 1 USB port for optional IntellliStripe 380
•
Windows 98*, NT*, ME, 2000, or XP
•
Adobe Acrobat Reader
* Windows 98 and NT can not be used with optional IntellliStripe 380
SPECIFICATIONS
Operational
Operating Voltage:
100 – 240 VAC
Operating Current
1.0 amp
Operating Temperature:
50
o
F to 122
o
F (+10
o
C to +50
o
C)
Humidity:
10% to 90% without condensing
Card Speed:
8 inches per second, typical
Resolution
10µ
inches
Analysis Area
All three data tracks excluding 0.130 inch at each end
Measure Limits
Conform to ISO 7811 within Analysis Area
Mechanical
Depth:
13.3 inches
Width:
7.5 inches
Height: 7.1 inches
Weight:
8 lbs.
Card Parameters
Width and Length: Per ISO/IEC Specification 7810:1995(E)
Thickness:
0.030 in ± 0.003 in (0.76 mm ± 0.08 mm)
Note
The InSpec 9000-2005 may not accurately read cards whose thickness and/or
warpage exceed the ISO 7810 specification. In addition, cards that are not
properly cleaned may give poor results along with contamination of the card path
and head face.