Teledex Y Series - Manual (Page 20)

20 www.teledex.com Y SERIES EXP100 USER GUIDE
Appendix B—Specifications
Hardware Interface
• RJ-45 x 2 for LAN
• RJ-45 x 1 for Tel Phone
• Two Punch Connector (IDC Connector) for
LAN/DSL/Power
• Active LED x 1
• Reset Button x 1
• Power Jack x 1
ADSL
• ADSL Standard ITU-T G.992.5, ITU-T G.992.3,
ITU-T G.992.1, ANSI T1.413 Issue 2
• G.992.5 (ADSL2+)
• G.992.3 (ADSL2)
• G.DMT
LAN Interface
• IEEE 802.3, IEEE 802.3u
• 10/100 BaseT Auto-Sense
• Support MDI/MDX
ATM Attributes
• Support 8 PVCs
• Service Class: UBR/CBR/VBR
Management
• SNMP, Telnet, Web-Based Management,
Configuration Backup and Restoration
• Software Upgrade via HTTP, TFTP Server, or
FTP Server
• Supports TR-069 for Remote Management
• CLI Command
Bridge Functions
• IEEE 802.1d
• VLAN Support
• RFC 1483/2684 Multi-Protocol Encapsulation
Over AAL5
• GMP Proxy
• IGMP snooping
Routing Functions
• Static route, RIP, and RIPv2, NAT/PAT, DHCP
Server/DHCP Relay/DHCP Client, DNS Proxy,
ARP
Security Functions
• PAP, CHAP, TCP/IP/Port Filtering Rules, Port
Triggering/Forwarding, Packet and MAC
Address Filtering, Access Control, SSH
Power Supply
• Input:100 - 240 Vac
• Output: 12 Vdc/1 A
Environment Condition
• Operating Temperature 0–35 Degrees Celsius
• Relative Humidity 5–95% (Non-Condensing)
Certifications
• TBR-21
• EN - 60950 -1
Packing Accessories:
• Module x 3
• Quarter Blank Spec x 2
• Power Adaptor x 1 (Optional)
• QIG for Troubleshooting
• Water-Proof Sealed PE Bag (for ATU-R&QIG)
x 1
NOTE: Specifications are subject to change
without notice.