Teledex Y Series - Manual (Page 16)

16 www.teledex.com Y SERIES EXP100 USER GUIDE
6.2.3 RESTORE DEFAULT
Click Restore Default Settings to restore factory
default settings.
After Restore Default Settings is clicked, the
following screen appears.
Close the browser and wait for 4 minutes
before reopening it. It may also be necessary, to
reconfigure your PC IP configuration to match
any new settings.
NOTE: This entry has the same effect as the
Reset button. The EXP100 board hardware and
the boot loader support the reset to default. If the
Reset button is continuously pressed for more
than 5 seconds, the boot loader will erase the
configuration data saved in flash memory.
6.3 SNMP Agent
Simple Network Management Protocol (SNMP)
allows a management application to retrieve
statistics and status from the SNMP agent in this
device. Select the
Enable radio button, configure
options, and click Save/Apply to activate SNMP.
6.4 TR-069 Client
WAN Management Protocol (TR-069) allows
an Auto-Configuration Server (ACS) to perform
auto-configuration, provision, collection, and
diagnostics to this device. Select desired values
and click
Apply/Save to configure TR-069 client
options.