Kenwood TS-990S - Manual (Page 19)

– 18 –
PC Control Command referenCe guide
DS1
Screen Display State (Function Configuration Screen)
Parameters:
P1
000: No Setting Screen
001 ~ 002: Unused
003: Antenna Name Setting Screen
004: Preselector Setting Screen
005: AGC Setting Screen
006: Transmission Voice Input Sound Source Setting Screen
007: Transmission Output Limit Setting Screen
008: VOX Level Setting Screen
009: Speech Processor Effect Type Setting Screen
010: Transmission Filter Setting Screen
011 ~ 014: CW Message Screen
015: RTTY Communcation Screen (Normal)
016 ~ 017: RTTY Message Screen
018: PSK Communication Screen (Normal)
019 ~ 020: PSK Message Screen
021: FM Tone Setting Screen
022: Reception Filter Setting Screen
023: Audio System Peak Filter Setting Screen
024: NB1 Level (Sub) Setting Screen
025: NB2 Level (Sub) Setting Screen
026: Auto Notch Tracking Speed Setting Screen
027: Band Eliminator Filter Setting Screen
028: NR1 Level (Sub) Setting Screen
029: NR2 Level (Sub) Setting Screen
030: Memory Channel Screen (Normal)
031: Program Scan Section Setting Screen
032: Program Slow Scan Point Setting Screen
033: Memory Scan Group Setting Screen
034: Voice Message Screen
035 ~ 037: Recording File Screen
038: Timer Setting Screen
039: Program Timer Setting Screen
040: Dimmer Setting Screen
041 ~ 127: Unused
128: Reception Equalizer Screen
129: Reception Equalizer Ajustment Screen
130: Transmission Equalizer Screen
131: Transmission Equzlizer Adjustment Screen
132: RTTY Communication Screen (Enlarged)
133: PSK Communication Screen (Enlarged)
134: Memory Channel List Screen (Enlarged)
135 ~ 159: Menu-Related Screen
160 ~ 163: File Selection Screen
• Various operations via commands may be limited, such as
the panel operation of the main body, due to the state of the
function setting screen.
Read
1 2 3 4 5 6 7 8 9 10
D S 1 ;
Answer
1 2 3 4 5 6 7 8 9 10
D S 1 P1 P1 P1 ;
DS2
Screen Display State (Other) Parameters:
P1
0: Various edit screen display OFF
1: Frequency is being entered
2: Frequency entry log is being displayed
3: Channel number is being entered
4: Character string is being edited
5: Memory Channel is being registered
• During various character string editing, various operations by
the command may be limited, such as panel operation of the
transceiver during frequency entry, channel number entry, and
memory channel registration.
Read
1 2 3 4 5 6 7 8 9 10
D S 2 ;
Answer
1 2 3 4 5 6 7 8 9 10
D S 2 P1 ;
DS3
End the Function Setting Screen
Parameters:
No parameters are used with this command.
• The same transceiver behavior as when transceiver [ESC] is
pressed.
Set
1 2 3 4 5 6 7 8 9 10
D S 3 ;