Kenwood TK-7185E User Manual
Page 30
24
• If memory is available on your transceiver for recording, “I am not available.
Leave your Message.” will be sent to the caller. The caller can then leave a
recorded message on your transceiver which you can later recall and listen to.
When a message is stored on your transceiver, “MSG RCVD” appears on the
display.
• If no memory is available on your transceiver for recording, “I am not available.”
will be sent to the caller and “MEMORY FULL” appears on the display.
■
p
lAybAcK
To play back a recorded conversation, memo, or message:
1 Press the key programmed as Playback to enter Playback mode.
• If the last action on your transceiver was to auto record your conversation,
“STORE?” will appear on the display, otherwise a recording channel with the time
of the recording will appear.
• To store the conversation record in the next available recording channel, press
the ■ key. To clear the conversation, press the
A or DTMF # key. To skip to
the stored recording channels, press the
S or DT
MF ke
y. To skip back 5
seconds, press the
2 Press the and keys to select the channel which you want to play back.
• “RM” represents automated reply messages.
• “AR” represents conversation records.
• “VM” represents voice memos.
3 The transceiver will announce the channel, then the recording will
automatically play back.
• When the entire recording has been played, “END OF MSG” (end of message) is
displayed.
• To delete the selected recording, press the
A or DTMF # key. To clear all the
recorded data, press and hold the
A or DTMF # key. A confirmation message
will appear on the display; press the
S or DTMF key to delete the recording(s)
or the
A or DTMF # key to cancel.
v
oice
g
uide
When pressing a transceiver key, an audio voice will announce the key function.
If programmed by your dealer, an audio voice will also announce the selected call
address, when changing call addresses.