Kenwood TK-7185E - Manual (Page 29)

23
VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
When using the optional VGS- voice guide & storage unit, you gain access to the
voice recorder and voice announcement functions. Ask your dealer for details.
Note: The VGS- is sold depending upon area.
v
oice
r
ecorder
The voice recorder function allows you to record your conversations and create
voice memos and automated message responses.
■ A
uTo
r
ecording
If activated, the auto recording function will continuously record all transmitted
and received signals. The recording storage area retains 30 seconds of
recording, so all transmitted and received signals are simultaneously recorded
and erased, leaving only the last 30 seconds of recording in memory.
• The auto recording indicator ( ) appears when this function is activated.
■ v
oice
m
emoS
To record a voice memo, for later playback:
1 Press and hold the key programmed as Playback for second.
• The duration of recording memory will appear on the display and begin counting
down.
2 Speak into the microphone to record your voice memo.
3 Press the ■, S, or key to end the recording at any time and store it into
the transceiver memory.
• If the memory becomes full, recording will stop automatically and store the voice
memo to memory.
• “WRITING” appears on the display while the recording is being stored to memory.
■
A
uTo
r
eply
m
eSSAge
(T
runKing
m
ode
o
nly
)
You can set the transceiver to automatically respond to Individual Calls:
1 Press the key programmed as Auto Reply Message to enter Auto Reply
Message mode.
• The Auto Reply Message indicator ( ) appears on the display.
2 When you receive an Individual Call, Auto Reply will begin after waiting for
3 seconds, the transceiver will send an automatic response to the caller,
and “GREETING” appears on the display.
• If you are available to receive the call, press any key to disable the auto
response.