Kenwood TK-7185E - Manual (Page 18)

2
c
All
d
iSplAyS
The following messages may appear on the display under certain circumstances:
•
ENGAGED: The called party is in another call.
• HOLDING: The transceiver is confirming the call made by the base station.
• INVALID: You entered an invalid call address.
• NU: The called party could not be reached (Number Unobtainable).
• NO REPLY: The called party has been called, but they did not respond to the
call.
• PARTY BUSY: The called party is temporarily prohibited from making calls.
• QUEUED: All communication channels are currently in use; your call will be
connected when a channel becomes free.
v
iewing The
S
TAcK
1 Press the Status/ Stack key (default is the S key) twice to enter the stack.
• If there is no data in the stack, “————————————” appears on the main
display and “–00” appears on the sub-display.
2 Press the and keys to view the stack entries.
• “NEW” momentarily appears on the sub-display if the message has not yet been
viewed.
• In the sub-display, “S” represents a status stack entry, “V” represents a voice stack
entry, and “D” represents a data stack entry.
3 Press the and C> keys to scroll through the selected entry, to view the
entire entry. Press the A key to toggle between the time/date of the received
call and the caller ID.
4 To erase an entry, select the desired entry and press the Clear key.
• “DELETE?” appears on the display. Press the S or key to confirm the deletion.
Press the A or # key to cancel.
5 To erase all entries, press and hold the Clear key.
• “DELETE?” appears on the main display and “ALL” appears on the sub-display.
Press the S or key to confirm the deletion. Press the A or # key to cancel.