Kenwood TK-7185E - Manual (Page 15)

9
p
rogrAmmAble
F
uncTionS
The , S, A, , C>, and ■ keys {page 7} can be programmed with the functions
listed below. Please contact your dealer for further details on these functions.
• Auto Reply Message
• AUX A
• AUX B
• Call
• Call Address Down
2
• Call Address Up 2
• Clear
• Clock
• Conventional
• Dialing
• Dialing Mode
3
• Emergency 4
• GPS Position Display 5
• Home Address
• Horn Alert
• LCD Brightness
• Network Select
• None
• Playback
• Public Address
• Redial
• Scrambler
• Send the GPS Data
• Site Lock
• Status/ Stack
6
• Sub LCD Display
• Transceiver Password
“Auto Reply Message” and “Playback” can be programmed only when the optional VGS- board has
been installed.
2 “Call Address Down” and “Call Address Up” can be programmed only on the optional microphone A, B,
C, and D keys.
3 “Dialing Mode” can be selected when Keypad Operation is set to Programmable.
4 “Emergency” can be programmed only on the key.
5 “GPS Position Display” can be assigned only if one of the COM ports is configured for GPS.
6 “Status/Stack” can be programmed only on the S key.
S
eArching For A
c
onTrol
c
hAnnel
After switching the power ON, press any key while the power-on text or unit
number is displayed to begin searching for a control channel.
• If no action is performed for 2 seconds, the transceiver will automatically begin searching
for a control channel.
• “---” appears on the sub-display and an arrow scrolls across the main display while the
transceiver is searching for a control channel.
• If more than one network is available, press the key programmed as Network Select to
manually change networks.