Basic operations, On/ off – Kenwood TK-7185E User Manual

Page 12

BASIC OPERATIONS

wiTching

ower

on/ oFF

Press the

switch to switch the transceiver ON.

• A beep sounds and the display momentarily lights up.
• If the Transceiver Password function is programmed, “PASSWORD” appears on the

display. If a key has been programmed as

Transceiver Password, you must press this

key first, before “PASSWORD” appears on the display. You must enter the password to

unlock the transceiver. Refer to “Transceiver Password”, below.

Press the

switch again to switch the transceiver OFF.

• If set up by your dealer, the transceiver will switch ON and OFF with the vehicle ignition.

■

rAnSceiver

ASSword

To enter the transceiver password:

1 Press the microphone DTMF keys corresponding to the password digits.

• Alternatively, you can enter the password by pressing the and keys to

select a digit, followed by pressing the

C> key to accept the entered digit and

move to the next digit.

• Press the

A or microphone # key to delete an incorrect character. Press and

hold the

A or microphone # key to delete all entered characters.

2 Press the S or microphone key to confirm the password.

• If you enter an incorrect password, an error tone sounds and the transceiver

remains locked.

djuSTing

The

olume

Press the key to increase the volume and the

key to decrease the volume.

When increasing or decreasing the volume level, the Volume Level indicator

appears on the display. The transceiver volume level can be adjusted between

levels 0 and 3.