Kenwood KDC-W9537U User Manual
Page 6
6
|
English
Notes
About DAB Tuner control
Refer to
A group on the Instruction manual of DAB
Tuner KTC-9090DAB (optional accessory) for the
control method of DAB Tuner function.
However, the following control methods of the
function for this unit may be differed from the
Instruction manual; therefore, refer to the following
supplemental instruction.
1. Select the preset band for Auto Ensemble Memory
Entry.
2. Press the [AME] button for at least 2 seconds.
Open Auto Ensemble Memory Entry.
After storing in the memory finishes, the number
of the pre-set buttons and the ensemble label are
displayed.
Memory> in this instruction manual. in this instruction manual. Type preset> in this instruction manual. At the operation to press [DISP] button, use [TI] About Bluetooth Hands free control Refer to the instruction manual of the Bluetooth 1. Press the Control knob. Select the "DIAL" display. knob. 4. Press the Control knob. 1. Operation is the same. Refer to the instruction manual of KCA-BT100. 2. Press the [FNC] button. Control knob. 4. Press the Control knob for at least 1 second. 1–3. Operation is the same. Refer to the instruction manual of KCA-BT100. 4. Press the Control knob. About Menu operation in this instruction manual. For the items to be set About display of Cell-Phone Status of this unit. For the information about the displayed B64-3773-00_00_E_English.indd 6 B64-3773-00_00_E_English.indd 6 07.5.10 5:18:20 PM 07.5.10 5:18:20 PM
and
button instead.
Hands Free Box KCA-BT100 (optional accessory).
However, the following control methods of the
function for this unit may be different from the
Instruction manual; therefore, refer to the following
supplemental instruction.
2. Press the [FNC] button.
3. Select the number to recall by turning the Control
3. Select the number to memory by turning the
5. Select "YES" using the Control knob.
6. Press the Control knob.
7. Press the [FNC] button.
For how to operate Menu, refer to
up, refer to the instruction of Hands Free Box.
Cell-Phone Status is displayed in the status display
icons, refer to the instruction manual of Hands
Free Box. Bluetooth connection status cannot be
displayed.