General features, Display type selection – Kenwood KDC-W9537U User Manual
Page 16
16
|
English
General features
Memory Recall mode
Recall the value in the memory by the memory
mode.
1
Select the source to adjust
Press the [SRC] button.
2
Enter recall mode
Using the Control knob, select "DSP" > "PRESET"
> "RECALL".
For the operation method, refer to
3
Select the recall item
Select the recall number using the Control
knob.
Press the Control knob.
Recall the value put by
15).
"Recall?" is displayed.
4
Recall the Audio Preset
Select "YES" using the Control knob.
"Recall Completed" is displayed.
5
Exit Memory Recall mode
Press the [FNC] button.
Display Type Selection
Changing the display mode.
1
Enter Display Type Selection mode
Using the Control knob, select "DISPLAY" >
"TYPE".
For the operation method, refer to
2
Select the Display Type
Turn the Control knob.
Select from the following display types:
Display
Display Type
"TYPE SELECT [A]"
!
1
9
"TYPE SELECT [B]"
3
3
2
9
"TYPE SELECT [C]"
3
0
3
2
9
"TYPE SELECT [D]"
8
7
7
9
3
Exit Display Type Selection mode
Press the Control knob.
4
Enter Display Mode Selection mode (Display
Type B/ Display Type C only)
Using the Control knob, select "DISPLAY" >
"MODE".
B64-3773-00_00_E_English.indd 16
B64-3773-00_00_E_English.indd 16
07.5.10 5:18:26 PM
07.5.10 5:18:26 PM