Kenwood KDC-W9537U - Manual (Page 24)

24 | English
RDS features
PTY (Program Type)
Selecting the Program Type and searching for a
station.
1 Enter PTY mode
Press the Control knob.
"PTY SELECT" is displayed.
⁄
• This function cannot be used during a traffic bulletin or
AM reception.
2 Select the Program Type
Turn the Control knob or push it towards up or
down.
Each time you push the knob, the Program Type
alternates between the program types shown in
the table below.
No. Program Type Display
1. Speech "All Speech"
2. Music "All Music"
3. News "News"
4. Current Affairs "Current Affairs"
5. Information "Information"
6. Sport "Sport"
7. Education "Education"
8. Drama "Drama"
9. Culture "Cultures"
10. Science "Science"
11. Varied "Varied Speech"
12. Pop Music "Pop Music"
13. Rock Music "Rock Music"
14. Easy Listening Music "Easy Listening M"
15. Light Classical "Light Classic M"
16. Serious Classical "Serious Classics"
17. Other Music "Other Music"
18. Weather "Weather & Metr"
19. Finance "Finance"
20. Children’s programs "Children's Prog"
21. Social Affairs "Social Affairs"
22. Religion "Religion"
23. Phone In "Phone In"
24. Travel "Travel & Touring"
25. Leisure "Leisure & Hobby"
26. Jazz Music "Jazz Music"
27. Country Music "Country Music"
28. National Music "National Music"
29. Oldies Music "Oldies Music"
30. Folk Music "Folk Music"
31. Documentary "Documentary"
⁄
• Speech and Music include the Program type shown
below.
Music: No.12 — 17, 26 — 30
Speech: No.3 — 11, 18 — 25, 31
• The Program Type can be put in the preset memory and
recalled quickly. Refer to the
(page 24).
• You can change the display language. Refer to
(page 25).
3 Search for the selected Program Type station
Push the Control knob towards [ 4] or [¢].
When you want to search for other stations, push
[
4] or [¢] of the Control knob again.
⁄
• When the selected Program Type is not found, "No PTY"
is displayed. Select another Program Type.
4 Exit PTY mode
Press the Control knob.
Program Type preset
Putting the Program Type in the Preset button
memory and quick recall.
Presetting the Program Type
1 Select the Program Type to preset
Refer to (page 24).
2 Enter Program Type preset mode
Press the [FNC] button.
3 Select the number you want to put in the
memory
Turn the Control knob or push it towards left
or right.
4 Preset the Program Type
Press the Control knob for at least 1 second.
5 Exit Program Type preset mode
Press the [FNC] button.
Recalling the preset Program Type
1 Enter PTY mode
Refer to (page 24).
2 Enter Program Type preset mode
Press the [FNC] button.
B64-3773-00_00_E_English.indd 24 B64-3773-00_00_E_English.indd 24 07.5.10 5:18:32 PM 07.5.10 5:18:32 PM