Kenwood KCA-BT200 - Manual (Page 7)

English | 7
Receiving a call
Answering a Phone Call
Press the [AUD] button or one of [1] – [6] buttons.
☞ Inserting a disc such as a CD will disconnect your call.
Rejecting an Incoming Call
Press the [ATT] button for at least 1 second.
Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1. Press the [AUD] button.
2. Push the Control knob towards up or down. Select
the "ANSWER" display.
3. Press the [AUD] button.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Press the [AUD] button.
2. Push the Control knob towards up or down. Select
the "REJECT" display.
3. Press the [AUD] button.
Answering the Waiting Call after Terminating the
Current Call
Press the [ATT] button for at least 1 second.
Switching between the Current Call and Waiting
Call
Press the [AUD] button.
During a call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode ( )
Press the Control knob ([ 38]).
Switches between Private talk ("PRVT") or Hands-free
talk when pressed.
Adjusting the Voice Volume during a Call
Turn the [AUD] knob.
Other functions
Clearing the Disconnection Message
Press the [ATT] button for at least 1 second.
Switching between Display Modes
Press the [AUTO]/ [TI] button. You can switch
between the Phone Book and the Call List.
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Model
B-1:
Press the [1] – [6] button for at least 2 seconds.
Model B-2:
2-1. Press the [FNC] button.
2-2. Select the number to memory by turning the
Control knob.
2-3. Press the Control knob for at least 1 second.
3. Exit the dialing method selection mode
Press the [ATT] button for at least 1 second.
Items Set in Function control
* To enter the Menu mode, press the Control knob for
at least 1 second.
Item Setting overview
MENU "Device
Regist"*
Register a Bluetooth device (pairing). Refer to
page 12.
"SPCL DVC
Select"* Allow registration of a special device that cannot be
registered normally. Refer to page 12.
"Phone
Selection"* Select a cell-phone subject to hands-free
connection. Refer to page 14.
"Audio
Selection"* Select the audio player to be connected. Refer to
page 14.
"Device
Delete"* Cancel registration of the Bluetooth device. Refer
to page 14.
"BT DVC
Status"* Display the status of the Bluetooth device.
"PIN Code
Edit"* Specify the PIN code required when registering this
unit using the Bluetooth device. Refer to page 12.
"Auto Answer" ”OFF”/ ”0s” – “99s”: Answer a call automatically
after lapse of the preset time interval for automatic
answer. Refer to page 22.
"SP Select" ”Front”/ ”F-R”/ ”F-L”: Specify the voice output
speaker. Refer to page 22.
"Call Beep" ”ON”/ ”OFF”: Output a beep from the speaker when
a call comes in. Refer to page 22.
"BT F/W
Update" Display the firmware version and update the
firmware. Refer to page 12.
BT > V-REC Make a voice dialing call
BT > VOICE > NAME Register a name tag for voice recognition. Refer to
page 15.
BT > VOICE > TYPE Register a type (category) voice tag for voice
recognition. Refer to page 15.
BT > SMS > SMSDL Download a short message. Refer to page 16.
BT > SMS > INBOX Display the received short message. Refer to page
16.
B64-4121-10_01_KE.indb 7 B64-4121-10_01_KE.indb 7 08.2.25 2:10:16 PM 08.2.25 2:10:16 PM