Kenwood KCA-BT200 User Manual

Page 23

English

FCC Notice

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.

CAUTION:

To maintain compliance with FCC's RF exposure
guidelines, use only the supplied antenna.
Unauthorized antenna, modification, or attachments
could damage the transmitter and may violate FCC
regulations.

IC Regulatory Information

This device complies with RSS210 of Industry Canada.
Operation is subject to the following two condition:
(1) this device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of
this device.

This Class B digital apparatus complies with Canadian
ICES-003.

Information on Disposal of Old Electrical
and Electronic Equipment (applicable for
EU countries that have adopted separate
waste collection systems)

Products with the symbol (crossed-out
wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment
should be recycled at a facility capable
of handling these items and their waste
byproducts. Contact your local authority
for details in locating a recycle facility
nearest to you. Proper recycling and waste
disposal will help conserve resources whilst
preventing detrimental effects on our
health and the environment.

• “ANS”/ “Auto Answer” (Setting the Time Interval

for Automatic Answer)

This function automatically answers (responds

to) a call after lapse of the preset time interval for
automatic answer.

“OFF” : Does not answer the phone call

automatically.

“0” : Automatically answers the phone call at once.
“1” – “99” : Automatically answers the phone call

after lapse of 1 – 99 seconds.

☞ If the time set in the cell-phone is shorter than that set

in the unit, the former will be used.

• “SPK”/ “SP Select” (Setting up the Voice Output

Speakers)

You can specify the voice output speakers.
“Front”/ “FRT” : Outputs voice from the front-left and

front-right speakers.

“F-R” : Outputs voice from the front-right speaker.
“F-L” : Outputs voice from the front-left speaker.

☞ Select the speaker which is further from the

microphone in order to prevent howling or echoes.

• “C-BP”/ “Call Beep”/ “Beep” (Setting the Beep of

the Incoming Call)

You can output a beep from the speaker when a

call comes in.

“ON” : Beep is heard.
“OFF” : Beep is canceled.

Function note

• Dial a number

• Depending on the type of your control unit, "

|" (all

segments are lit) is displayed for #.

• Calling a number in the call log

• The outgoing call list and the incoming call list, and the

missed call list are the lists of calls originated from and
received at this unit. They are not the ones stored in the
cell-phone memory.

• Calling a number in the Phone Book

• To use the Phone Book, it must have been downloaded

from the cell-phone. For details, see Phone Book>.

• Up to 19 characters can be displayed for each name in

the Phone Book.

• During search, a non-accent character such as "u" is

searched for instead of an accent character such as "ü".
The non-alphabetical caracters such as Chinese and
Russian are classified as symbol.

• Switching to the Private Mode

• Depending on the type of your cell-phone, switching

to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
the hands-free talk mode by operating this unit. Operate
your cell-phone to return to the hands-free talk mode.

• Switching between Display Modes

• Depending on the type of your control unit, the

following restrictions are placed.
- Up to 19 characters can be displayed.
- The # letter cannot be displayed, or "

|" (all segments

are lit) is displayed for #.

- You cannot switch between display modes.

B64-4121-10_01_KE.indb 23

08.2.25 2:10:27 PM