Kenwood KCA-BT200 - Manual (Page 25)

English | 25
Connection
1 2 3
Accessory 1
(3 m, 9.5 ft)
Control Unit
(5L connector)
Connector for external device
⁄
• Only the terminal which has
the same shape as that of the
connector connected to the
control unit can be used.
• Only one external device can be
connected.
Type Switch (page 24)
(1.5 m, 5ft)
Control Unit
(KAB connector)
Accessory 4
TO CHANGER 2 TO CHANGER 1 TO HEAD UNIT
KCA-BT200
Control Unit (5L)
Disc Changer
KCA-S220A
¤
• Please keep the total extension of the control cable from
the control unit to the disc changer to 13 m (43 ft) or
less. Control cable lengths in excess of 13 m will cease to
function properly.
If You Want to Connect KCA-S220A
Connect the Hands-Free Box to the terminal labelled
TO CHANGER 2.
Installation
Installation the Microphone Unit
1 Check the installation position of the microphone
(accessory 1).
2 Remove oil and other dirt from the installation
surface.
3 Install the microphone.
4 Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Fix a cable with a commercial
item of tape.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
Adjust the direction of the microphone to the driver.
⁄
• Install the microphone as far as possible from the cell-
phone.
B64-4121-10_01_KE.indb 25 B64-4121-10_01_KE.indb 25 08.2.25 2:10:28 PM 08.2.25 2:10:28 PM