Basic operation of hands-free phoning (model-d), Before use, Making a call – Kenwood KCA-BT200 User Manual
Page 10
10
|
KCA-BT200
Before Use
• You need to register your cell-phone before using
it with this unit. For more details, see
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see
• For the method of operation in the Menu mode,
refer to the Instruction Manual for Control Unit.
• For more information regarding the function with
[
] mark, see
Making a call
Dialing Method
1. Entry dialing method mode
Model-D-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-D-4:
Select "D.MODE" in Menu mode.
2. Select a dialing method
Model-D-1,
4:
Press the Control knob ([
38] button).
"N-DIAL" » "PH-BOOK1" » "PH-BOOK2" » "OUT-CALL"
» "IN-CALL"
Model-D-2:
Press the Control knob ([
38]).
"DIAL" » "INITIAL" » "PHONE BOOK"/ "PH.BOOK" »
"OUT-CALL" » "IN-CALL"
Model-D-3:
2-1-1. Press the [NEXT] button.
2-1-2. Press the [1] ("DIAL"), [2] ("PHBK"), [3] ("OUT-
C"), or [4] ("IN-C") button.
Pressing the [2] ("PHBK") button switches
between the Phone Book search methods.
3
Methods of operations in the above modes are
described below.
3. Exit the dialing method selection mode
Model-D-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-D-4:
Exit Menu mode.
3
Dial a number (
)
2-1. Select the "N-DIAL"/ "DIAL" display.
2-2. Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([
¢]) button on the remote controller.
Basic Operation of hands-free phoning (Model-D)
2-3. Make a call
Press the [DIRECT] button on the remote controller.
☞ You can input max 32 digits.
3
Speed dialing (Preset dial)
2-1. Select the "N-DIAL"/ "DIAL" display.
2-2. Select the preset dial number
Model-D-1,
4:
Press the [1] – [6] button.
Model-D-2:
2-2-1. Press the [FNC] button.
2-2-2. Select the number to recall by turning the
Control knob.
2-2-3. Press the Control knob.
Model-D-3:
2-2-1. Press the [NEXT] button.
2-2-2. Press the [1] ("1") – [6] ("6") button.
2-3. Make a call
Press the Control knob ([
38] button) for at least 1
second.
☞ You need to register the preset dial number. (page 11)
3
Calling a number in the call log (
)
2-1. Select the "OUT-CALL"/"OUT-C" (outgoing call) or
"IN-CALL"/"IN-C" (incoming call) display.
2-2. Select a name or phone number
Push the Control knob towards up or down.
2-3. Make a call
Press the Control knob ([
38] button) for at least 1
second.
3
Calling a number in the Phone Book (
)
2-1. Select the "PH-BOOK1"/ "INITIAL" display, proceed
to step 2-2.
Select the "PH-BOOK2"/ "PHONE BOOK"/ "PH.
BOOK" display, proceed to step 2-3.
2-2. Select the initial to be searched for
Operation type
Operation
Move to the next
character.
Push the Control knob towards right or left.
Move to the next row. Push the Control knob towards up or down.
Determine the
selected initial
Press the Control knob ([
38] button) for at
least 1 second.
2-3. Select the name
Operation type
Operation
Change the name.
Push the Control knob towards up or down.
Change the initial.
Push the Control knob towards right or left.
2-4. Make a call
Press the Control knob ([
38] button) for at least 1
second.
B64-4121-10_01_KE.indb 10
B64-4121-10_01_KE.indb 10
08.2.25 2:10:18 PM
08.2.25 2:10:18 PM