Kenwood KCA-BT200 - Manual (Page 5)

English | 5
Receiving a call
Answering a Phone Call
Model-A-1: Press the Control knob or one of [1] – [6]
buttons
Model-A-2: Press the [VOL] button or one of [1] – [6]
buttons
☞ Inserting a disc such as a CD will disconnect your call.
Rejecting an Incoming Call
Press the [SRC] button.
Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1. Model A-1: Press the Control knob.
Model A-2: Press the [VOL] knob.
2. Push the Control knob towards up or down. Select
the "ANSWER" display.
3. Model A-1: Press the Control knob.
Model A-2: Press the [VOL] knob.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Model A-1: Press the Control knob.
Model A-2: Press the [VOL] knob.
2. Push the Control knob towards up or down. Select
the "REJECT" display.
3. Model A-1: Press the Control knob.
Model A-2: Press the [VOL] knob.
Answering the Waiting Call after Terminating the
Current Call
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between the Current Call and Waiting
Call
Model A-1: Press the Control knob.
Model A-2: Press the [VOL] knob.
During a call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode ( )
Press the [ 38] button.
Switches between Private talk ("PV TALK") or Hands-
free talk ("HF TALK") when pressed.
Adjusting the Voice Volume during a Call
Model A-1: Turn the Control knob.
Model A-2: Turn the [VOL] knob.
Other functions
Clearing the Disconnection Message
Press the [AUTO]/ [TI] button for at least 1 second.
Switching between Display Modes
Press the [AUTO]/ [TI] button. You can switch
between the Phone Book and the Call List.
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Press the [1] – [6] button for at least 2 seconds.
3. Exit the dialing method selection mode
Press the [MENU] button.
Items Set in Menu mode
* To enter the Menu mode, press the Control knob for
at least 1 second.
Display Setting overview
"DVC REGIST"*/ "DVC
REG"* Register a Bluetooth device (pairing). Refer to page 12.
"S-DVC SELECT"*/
"SDVC SEL"* Allow registration of a special device that cannot be
registered normally. Refer to page 12.
"PHONE SEL"*/
"PHN-SEL"* Select a cell-phone subject to hands-free connection.
Refer to page 14.
"DIALING MODE"*/
"D.MODE"* Select a dialing method. Refer to page 4.
"AUDIO SEL"*/
"AUD-SEL"* Select the audio player to be connected. Refer to page
14.
"SMS DOWNLOAD"*/
"SMS DL"* Download a short message. Refer to page 16.
"SMS INBOX"*/
"INBOX"* Display the received short message. Refer to page 16.
"VOICE TAG"*/
"VOICETAG"* Register the voice tag for “voice recognize”. Refer to
page 15.
"VOICE RECOG"*/
"V-RECOG"* Make a voice dialing call. Refer to page 4.
"DEVICE DEL"*/
"DVC-DEL"* Cancel registration of the Bluetooth device. Refer to
page 14.
"DVC-STATUS"/
"D-STATUS" "HF-CONNECT”/ "AD-CONNECT”/ "BAT”/ "SGNL”: Display
the status of the Bluetooth device. Refer to page 22.
"PIN EDIT"* Specify the PIN code required when registering this unit
using the Bluetooth device. Refer to page 12.
"AUTO ANS"/
"ANS" ”OFF”/ ”0” – “99”: Answer a call automatically after
lapse of the preset time interval for automatic answer.
Refer to page 22.
"SP SEL"/
"SPK" ”FRT”/ ”F-R”/ ”F-L”: Specify the voice output speaker.
Refer to page 22.
"CALL BEEP"/ "C-BP" ”ON”/ ”OFF”: Output a beep from the speaker when a
call comes in. Refer to page 22.
B64-4121-10_01_KE.indb 5 B64-4121-10_01_KE.indb 5 08.2.25 2:10:15 PM 08.2.25 2:10:15 PM