Kenwood KCA-BT200 - Manual (Page 21)

English | 21
Other functions
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Press the [ P 1 ] – [ P 3 ] button for at least 2
seconds.
Setting up the Hands-Free Phone
Press the [ S e t Up ] button on Hands-Free Control
screen.
H a n d s F r e e S e t U p
Return
Au t o A n s w e r i n g
S e l e c t S e l e c t S e l e c t D e l e t e
P h o n e Vo i c e
8
F - R i g h t
B e e p
O n
AUTO
1 1
2 2
5
3
4
1 Sets an automatic response time after call
termination. ( "8")
"Off ": This function can not use.
"0-99": Sets to calling ring time (second).
2 Sets a ringing tone output position.
( "F-Right")
"F-Left": Outputs the tone from the front left-
hand side speaker.
"F-Right": Outputs the tone from the front right-
hand side speaker.
"Front All": Outputs the tone from the both front
speakers.
3 Set the beep of the incoming call. ( "On")
"On": Beep is heard.
"Off ": Beep is canceled.
4 Display the Phone Select screen.
5 Display the Phone Delete screen.
⁄
• Select the speaker which is further from the microphone in
order to prevent howling or echoes.
Selecting a Hands-Free Phone
1. Display the Hands-Free Set Up screen
Press the [ S e t Up ] button on Hands-Free Control
screen.
2. Display the Phone Select list
Press the [ S e l e c t S e l e c t ] button on Hands-Free
Set Up screen.
Phone Select
Return
Kenwood 1
Kenwood 2
Kenwood 3
Kenwood 4
Kenwood 5
AUTO
3. Select a Hands-Free phone you wish to use
Press the [ Kenwood 1 ] button.
⁄
• If a cell-phone is already selected, deselect it, and then
select a different one.
• The firmware version ”BT200 FW ***” is displayed at the end
of the Bluetooth device list.
For how to update the firmware, access our website.
http://www.kenwood.com/bt/information/
• The audio player is displayed on the device list after the
registration. However, the audio player on the list cannot be
selected.
Deleting the Hands-Free Phone
1. Display the Hands-Free Set Up screen
Press the [ S e t Up ] button on Hands-Free Control
screen.
2. Display the Phone Delete list
Press the [ S e l e c t D e l e t e ] button on Hands-Free
Set Up screen.
Phone Delete
Return
Kenwood 1
Kenwood 2
Kenwood 3
Kenwood 4
Kenwood 5
AUTO
3. Select a Hands-Free phone you wish to delete
Press the [ Kenwood 1 ] button.
⁄
• The Phone Book, outgoing call list, and incoming call list are
deleted together with the deleted Hands-Free phone.
• The firmware version "BT200 FW ***" is displayed and
cannot be deleted.
B64-4121-10_01_KE.indb 21 B64-4121-10_01_KE.indb 21 08.2.25 2:10:24 PM 08.2.25 2:10:24 PM