Siemens KA62NV40 - Manual (Page 28)

28
No display on the display
panel. The mains plug of the appliance is not in the socket
properly. The fuse for the domestic supply is switched
off.
Check whether the power is on, the fuse must be switched
on.
The interior light is not
functioning. The light switch for the freezer or refrigerator
compartment is sticking.
Check whether the light switch can move.
The light (LED) is defective. See chapter Light".
The appliance becomes
slightly louder for a brief
period. Not a fault! Your appliance is designed to save energy. Under certain conditions (e.g. activation of the Super function)
the appliance must work harder for a brief period and therefore becomes slightly louder.
Appliance has no
refrigerating capacity.
The interior light is not
functioning. Power failure; the fuse has been switched off;
the mains plug has not been inserted properly.
Check whether the power is on, the fuse must be switched
on.
The refrigerating unit
is switching on more
frequently and for longer. Appliance door opened frequently. Do not open the door unnecessarily.
Large quantities of fresh food are being frozen. Do not exceed max. freezing capacity.
The ventilation openings have been covered. Remove obstacles.
The temperature in the
refrigerator or freezer
compartment is too cold. Temperature has been set too low. Select a warmer temperature (see Setting the
temperature").
The frozen food is frozen
solid. Loosen frozen food with a blunt object. Do not use a knife or
pointed object.
Appliance selfĆtest
Your appliance features an automatic
selfĆtest program which shows you
sources of faults which may be repaiĆ
red by customer service only.
Starting the appliance
selfĆtest
S Switch off the appliance and wait
5 minutes.
S Switch on the appliance again.
S Simultaneously press button +" and
-" button for 5 seconds.
The selfĆtest programme starts. If E.."
is indicated on the display panel,
an error has occurred. If a fault is
indicated, inform customer service.
Ending the appliance selfĆtest
S Press the +" and -" buttons again
for 5 seconds.
Customer service
Your local customer service can be
found in the telephone directory or in
the customerĆservice index. Please
provide customer service with the apĆ
pliance product number (EĆNr.) and
production number (FD).
This information can be found on the
product label. 2
To prevent unnecessary callĆouts, pleaĆ
se assist customer service by quoting
the product and production numbers.
This will save you additional costs.
en