Night Guard Home Surveillance System C3-RS-900LCD User Manual
Page 9
9
b. Press
button for real time indication of when the timer is counting
down.
10.
Out Of Range and Temperature Indication:
If this feature is selected, the system will automatically check if you
are within transmitting range and check the temperature every 30
minutes.
1. If within the range, the
icon will display on the LCD screen.
2. If you are out of range, the
icon will disappear on the LCD screen.
D. CLOCK & TIMER SETTING:
Transmitter Button
Description
Press Transmitter
Button
1
Press & Hold the
button until hour flashes
Clock Setting (Hour)
*Flash digit for adjusting
for
– and
for
+
Press the
button
once
Time setting (Minute)
*Flash digit for adjusting
for
– and
for
+
2
Press the
button
once.
Alert Alarm Time Setting
(Hour)
*Flash digit for adjusting
for
– and
for
+
Press the
button
once
Alert Alarm Time Setting
(Minute)
*Flash digit for adjusting
for
– and
for
+
Press the
button
once
Alert Alarm Setting ON /
OFF
for OFF and
for ON
3
Press the
button
once
Count Down Timer Setting
(Hour)
*Flash digit for adjusting
(Max.19 hours 59 minutes)
for
– and
for
+
Press the
button
once
Count down Timer Setting
(Minute)
*Flash digit for adjusting
for
– and
for
+
Press the
button
once
Count down Timer Setting
ON / OFF
for OFF and
for ON
4
Press & hold the
button for 2 seconds.
Daily Timer Start Timer
Setting Flash
/
icon and “Hours” for
adjusting
for
– and
for
+
EXIT: Press and hold the
button for 2 seconds or leave it for 10seconds,
the system will exit the
programming mode.
1. Clock Setting: Example to 10:30 AM
1. Press & hold the
button for 3 seconds, with two-melody sounds and
the “Hours” digit flashes for adjusting.
2. Press the
or
button to decrease or increase the “Hour” digit until
AM10:xx