Night Guard Home Surveillance System C3-RS-900LCD - Manual (Page 12)

12
+
Channel # 5 Timer Output (5)
+
Channel # 6 Timer Output (6)
LCD DISPLAY TRANSMITTER OPERATION ONLY:
Transmitter Button System Function Remark
-
(C)
System’s Trigger Record
Check
Press within 3 seconds
- -
(C)
System’s Status Check Press within 3 seconds
- ( )
Button Lock
Press within 3 seconds and
Hold
button for 2 seconds
-
( ) Optional Driving Pager Press within 3 seconds
-
( )
Monitor Indoor Temperature Press within 3 seconds
LCD screen lamp turns on for
5 seconds.
Press and hold for 1 second
- -
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter
Press within 3 seconds
Warning: Press the button two times when the battery
compartment is empty, and then insert the new battery.
B. BUTTON LOCK:
This may be useful if you want to disable the transmission function of the remote
control temporarily to prevent the inadvertent pressing of the buttons. Press the
button first, within 3 seconds press and hold the ( ) button for 2
seconds to activate or cancel the button lock function. The icon will displayed
on the LCD screen to show the LCD remote transmitter is on “Button Lock”.
The 2-way LCD transmitter:
Press the button first, within 3 seconds press
and hold the ( ) button for 2 seconds to activate
or cancel the button lock function.
The icon will be displayed on the LCD screen to
confirm that the LCD remote transmitter is in the
“Button Lock
” mode.