Night Guard Home Surveillance System C3-RS-900LCD User Manual

Page 14

System Arm

Door Ajar

Trunk / Hood Ajar

Clear The Flash Icon:

Pressing the

button 3 times within 3
seconds will clear the
flash icon on the LCD
screen transmitter.

DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you
have left a door, trunk, or hood lid ajar.

SILENT ARMING / DISARMING: Pressing the transmitter

and

button

at the same time will arm or disarm your security system, No chirp sound will
be heard, arm / disarm confirmation will be through the vehicles parking lights
only.

SHOCK SENSOR BY-PASS: Pressing the

button on the transmitter two

times within 3 seconds will arm the security system and by-pass the shock
sensor. The system will chirp one additional time to confirm the sensor bypass
mode was activated. The sensor bypass feature is programmed to activate for
one arming cycle only. The security system will return to normal operation
during the next arming cycle.

H. PASSIVE ARMING (programmable)

Active arming / disarming is controlling your security system via the remote
transmitter. This security system is equipped with an optional Passive Arming
feature which allows the security system to arm 30 seconds after the last door
is closed. Operation is as follows.

1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30

seconds. If you reopen any door / hood / trunk, the security system LED will
stop flashing. It will begin flashing again once all vehicle entrances are
closed.

3. After 30-second timer has elapsed, the security system will automatically

“ARM”. The siren will chirp [1] time and the parking lights will flash [1] time.

PASSIVE ARMING WITH PASSIVE DOOR LOCKING: (programmable)

The vehicle doors will automatically lock after passive arming cycle has

been completed.

PASSIVE ARMING BY-PASS: While the system is disarmed, press the

buttons twice, the system will respond with [1] chirp and LED will turn “ON”.
The security system will remain in this temporary state for as long as you

wish. To exit passive by-pass, press the transmitter

button and the

system will return to normal status.

I. ACTIVE DISARMING – UNLOCK & DISARM:

1. Press

button on the transmitter.

2. The siren will chirp twice and parking lights will flash twice to indicating

that the security system is now disarmed. The vehicle’s door will unlock