Night Guard Home Surveillance System C3-RS-900LCD User Manual
Page 21
21
W. CHANNEL 5 TIMER CONTROL OUTPUT
Pressing the transmitter
(5) and
(5) buttons at
the same time will activate the Channel 5 function. Channel
5 is user-programmable timer output. You may program the
built-in timer to send a ground signal for any time duration
from 1 second to 120 seconds. For instance, this timer
output may be used to turn on the headlight, power window
or sunroof. (Factory defaults setting at momentary output.)
X. CHANNEL 6 TIMER CONTROL OUTPUT
Pressing the transmitter
(6) and
(6) buttons at
the same time will activate the Channel 6 function. Channel
6 is user-programmable timer output. You may program the
built-in timer to send a ground signal for any time duration
from 1 second to 120 seconds. For instance, this timer
output
may be used to turn on the headlight, power window or
sunroof.
(Factory defaults setting at momentary output.)
Y. SECOND VEHICLE SECURITY OPERATION:
Your 5-button remote transmitter can be utilized to control a second vehicle
security system, To program the remote control transmitter to a second vehicle,
follow the instructions for Transmitter programming.
Programming the Transmitter to 2
nd
Car
Enter:
1. Turn the ignition key ON 3 times. (Finishing in the ON position)
2. Press valet switch 2 times, holding in on the 2
nd
push, you will hear a
long siren chirp. (Release the valet switch)
3. Press the shift button of the Car 2 transmitter.
** LCD transmitter must be put in 2
nd
car mode to program for 2
nd
car.
(See next page)
4. Press the lock button on the transmitter; you will hear 1 siren chirp.
Turn OFF the ignition switch; you will hear 3 long siren chirps to confirm
programming and exit transmitter programming.
**
For 2-way LCD Display Transmitter:
2nd
Car Operation:
1. Press
first, within 3 seconds press and hold the
and
buttons at the same time for 2 seconds. Two beeping
sound and the “
” icon will be displayed on the LCD
screen to indicate the second transceiver pin code is
programmed.
3. While the “
” icon is displayed on the LCD screen, you
can remotely control and communicate with a second vehicle’s
security system. It has two short “bi” sounds while pressing the