Night Guard Home Surveillance System C3-RS-900LCD User Manual
Page 19
19
a. The siren still be sounding and the parking lights remain flashing.
b. The starter disable will activate to prevent the vehicle from starting.
c. It will remain active until the vehicle's battery power exhausted or until the
valet switch has been pushed with the ignition ON.
OVERRIDE THE SYSTEM TO TURN OFF ANTI CAR- JACKING:
Turn the ignition switch from OFF to ON, and within 10 seconds push valet
switch, the siren will stop and the system will be disarmed
Note: If you use password pin code to double protect the vehicle security, you
will need to use it to completely disarm the system.
P. SYSTEM’S TRIGGER CHECK
Press the transmitter
first, within 3 seconds press
(C) button. It responds with one melody sound and all
trigger’s records will immediately be displayed on the LCD
screen.
Q. SYSTEM’S STATUS CHECK
When you want to check the system’s present status
through the LCD screen, press the transmitter
button twice, within 3 seconds press
(C) button.
It responds with one melody sound.
R. DRIVER PAGING
This feature can be used in the event that someone wants to page the driver
of the parked vehicle.
In Car Driver Paging
If the ignition switch is in the “OFF” position, press and hold the valet switch for
2 seconds to page the driver, one chirp sound shall be emitted from the
vehicle. A paging melody sound continues sounding from your Remote LCD
Transmitter and “
” indication flashes on the LCD screen.
Out of Car Driver Paging
If someone tries to page you by tapping the paging (knock) sensor which is
usually mounted on the bottom part of front window, the paging melody sound
continues sounding from your Remote LCD Transmitter and “
” indication
flashes on the LCD screen.
1. To activate driver paging Press the transmitter
button first, within 3 seconds press
(
) button to
activate the outdoor driver paging function, It responds
with a chirp from the vehicle, and a melody sound and
"
" indication flashes on the LCD screen to confirm
the function is on.
2. When tapping the paging (knock) sensor, one chirp