Night Guard Home Surveillance System C3-RS-900LCD User Manual

Page 10

3. Press the

button once again, the “Minute” digit flashes for adjusting.

4. Press the

button to decrease or increase the “Minutes” digit

until AM 10:30

5. Press the

button for 2 seconds with one-melody sound to confirm

exiting the timer program mode.

2. Alert Alarm Timer Setting: Example to PM 6:30

1. Press & hold the

button for 3 seconds, with two-melody sounds and the

“Hours” digit flashes for adjusting.

2. Press the

button twice, the LCD screen will show the

icon and the

“Hours” digit will flash for adjustment.

3. Press the

button to decrease or increase the “Hour” digit until

PM 6:xx

4. Press the

button once again, the “Minutes” digit flashes for adjusting.

5. Press the

button to decrease or increase the “Minutes” digit until

PM 6:30

6. Press the

button once again, the

icon flashes for alert alarm “ON /

OFF” setting

7. Press the

button to start the “Alert Alarm Timer”, and the “ON” icon will

show on the LCD screen. Press the

button to stop the “Alert Alarm Timer”,

and the “OFF” icon will show on the LCD screen.

8. Press

button for 2 seconds with one-melody sound to confirm exiting the

timer program mode.

3. Count Down Timer Setting: Example Set count down timer at 2:30

1. Press & hold the

button for 3 seconds, with two-melody sounds

and the “Hours” digit flashes for
adjusting.

2. Press the

button 5 times, the LCD screen will show the

icon

and “Hours” digit flashes for adjusting.

3.Press the

button to decrease or increase the “Hour” digit

until 2:xx

4.Press the

button once again, the “Minutes” digit flashes for

adjusting.

5. Press the

button to decrease or increase the “Minute” digit

until 2:30

6. Press the

button once again, the

icon flashes for alert alarm

“ON / OFF” setting

7. Press the

button to start the count down timer, and the “ON” icon