Night Guard Home Surveillance System C3-RS-900LCD User Manual
Page 8
8
4. Stop The Trigger Melody Sound:
While triggering the alarm the LCD
screen will alert user through melody sound and flashing trigger icon. Press
any button on the LCD remote transmitter to stop melody sound only.
5. Button Lock:
This may be useful if you want to disable
the transmission function of the remote control temporarily to
prevent the inadvertent pressing of the buttons. Press the
button first, within 3 seconds press and hold the
( )
button for 2 seconds to activate or cancel the button lock
function The
icon will displayed on the LCD screen to show
the LCD remote transmitter is on “Button Lock”.
6. Vibration / Melody Mode:
This feature is useful when you are in a noisy place and it is
difficult to hear the beep sound from the remote control. The
remote control in this mode will vibrate when your security
system is triggered.
Press the
button first, within 3 seconds press and
hold the
(
) button for 2 seconds to select the mode
of vibration or melody. The
icon will be displayed
on the LCD screen to showing that the LCD remote
transmitter is in vibration mode.
7. Enable / Disable Bi Sound While Pressing Button:
The remote has a short “bi” sound while pressing the button of the LCD screen
transmitter.
If you want to mute the “bi” sound while pressing the buttons. Press the
button first, within 3 seconds press and hold the
(Bi) button for 2 seconds
to disable the “bi” sound.
8. Low Battery Indication:
When the power of the battery weakens, the remote has two short “bi” sounds
and will flash the
icon while pressing the button of the LCD screen
transmitter.
9. Set Up Fixed Count Down Timer:
1. Press the
button first, within 3 seconds press and hold the
(
)
button for 2 seconds, the LCD screen will shows an
icon and timer (i.e.
0:10),
2. Press the
(
) button again showing next order time on the screen
(ie.0: 20), press them again (ie.0: 30)…and so on.
3. Leave the buttons alone and unit will start counting down. The
icon will
start flashing
Note: 1.The count down period is fixed to 10 minutes, 20 minutes, 30
minutes, 1 hour, 1.5 hours and 2 hours maximum.
a. When the count down timer shows 0:00 the time has elapsed.