Kenwood TS-990S - Manual (Page 9)

PRIOR TO YOUR FIRST QSO
VII
Index Contents
■ NOTATIONS FOR USER OPERATION
In this manual, various user operations are described, as
below.
Notation Example Overview
Press down
the main
power
switch (I/O)
Press the main power switch (I/O)
located on the rear panel, to the "I"
(ON) or "O" (OFF) position.
Press [ ]. Press [ ] on the front panel.
Press Press [MENU].
The MENU screen appears. If the
MENU screen is open, the MENU
screen closes.
Press Press [VOX].
Press momentarily to activate the
unique function of the key.
Press Press [ESC].
Press to revert to the screen which was
displayed prior to the current screen,
or to close the screen assigned for the
particular task.
Press and
hold
Press and hold
[CW/CW-R].
Press and hold
[(RESET)]
Press and hold a key for the time
configured in Menu 0-12, "Long Press
Duration of Panel Keys", to activate
the unique function of the key or the
function assigned to the key.
Hold down Hold down the
[PTT] switch.
Hold down a key to activate or enable
the specific function or behavior, until
the key is released.