Kenwood TS-990S - Manual (Page 122)

5-44
5 ASSISTING YOUR SMOOTH QSO
Index Contents
ENABLLING THE ENCODE UOS
Use this function to transmit a number or symbol following
a space during the transmission in RTTY (FSK) mode.
Then the receive station recognizes the number or symbol
following the space, thus reducing the letter corruption.
[F1] [F7]
[MENU] [MULTI/CH]
1 Select Group No. 2, "Decoding & Encoding", from the
Menu screen.
2 Access Menu 04, "TX UOS".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) or [+] (F5) to select "On" or "Off".
The default is “On” (use with Encode UOS). Selecting “Off”
disables the Encode UOS.
5 Press [ ] (F1).
6 Press [MENU] to exit.
SENDING THE NEWLINE CODE AT THE START AND
END OF TRANSMISSION
The new line code (CR+LF) can be transmitted when
the RTTY communication begins and ends. The RTTY
message begins and ends with a new line in the decode
display of the receiving station making it easier to view the
transmitted RTTY message.
[F1] [F7]
[MENU] [MULTI/CH]
1 Select Group No. 2, "Decoding & Encoding", from the
Menu screen.
2 Access Menu 05, "Automatic Newline Insertion".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) or [+] (F5) to select “On” or “Off”.
The default is “On” (sending a newline code). Selecting “Off”
does not allow the transceiver to send a newline code.
5 Press [ ] (F1).
6 Press [MENU] to exit.