Utilizing an rtty message memory, Storing messages, Utilizing an rtty message memory -40 – Kenwood TS-990S User Manual
Page 118: Storing messages -40
5-40
5 ASSISTING YOUR SMOOTH QSO
UTILIZING AN RTTY MESSAGE MEMORY
You can save frequently used fixed phases commonly
used in RTTY (FSK) mode as RTTY messages in the
RTTY message memory. If you configure automatic TX
and RX triggers in your messages, you can transmit the
RTTY messages with ease. You can store a maximum of
eight RTTY messages in channel 1 through channel 8.
STORING MESSAGES
[F1] [F7]
[FSK/PSK/REV]
[ESC]
[MULTI/CH]
1 Press [FSK/ PSK/ REV] to enter RTTY (FSK) mode.
2 Press [DECODER] (F3) to open the RTTY Encode/
Decode screen.
3 Press [MEMORY] (F5) to open the RTTY Message
screen.
If [MEMORY] (F5) is unavailable in the function key guide,
press [MORE] (F1). An alternate key guide will appear.
4 Press [
] (F3) or [
] (F4), or rotate the
MULTI/CH control to select a channel to which a CW
message will be stored.
If [
] (F3) and [
] (F4) are unavailable in the
key guide, press [MORE] (F2).
5 Press [MSG] (F5) to allow editing of the message for
the selected channel.
6 Use functions keys, the MULTI/CH control, or a USB
keyboard to enter a text string.
[SPACE] (F1): Press to enter one space.
[-] (F2) and [+] (F3): Press to display the previous or next
character.
[
] (F4) and [
] (F5): Press to move the cursor
to the left and right.
[SAVE] (F6): Press to store the selected characters.
[BACK SPACE] (F): Press to delete the character to the left
of the cursor.
[DEL] (F): Press to delete the character to the right of the
cursor.
[CHAR] (F): Changes the character type. Each time you
press [CHAR] (F), the character type cycles through the
following sequence:
ABC (upper case) > abc (lower case) > !”# (symbols) > ABC
(upper case)
Available alphanumeric characters and symbols (a maximum
of 70 characters)
A
B C D
E
F
G H
I
J
K
L M N
O P Q R
S
T
U
V W X
Y
Z
0
1
2
3
4
5
6
7
8
9
!
“
#
$
&
'
(
)
.
,
-
?
:
;
/
Space
Line Break
7 Press [SAVE] (F6) to store the edited message.
Pressing [CANCEL] (F7) deletes the contents being edited
and ends the character entry.
8 Press [
] (F1).
9 Press [ESC] to exit.