Kenwood TS-990S User Manual
Page 48
3 MENU
3-6
TX/RX Filter & Misc. (Group 6)
Menu
Display
Configuration
Range
Default
Reference
Page
Message
6-00
Playback Time (Full-time Recording) Playback time for the full-time recording
Last 10 [s], Last 20 [s], Last 30
[s]
Last 30 [s]
6-01
Recorded Audio File Storage Location Location of holder where the recorded files
will be stored
Internal, USB
Internal
13-4
Transmit Management
6-02
Time-out Timer
Maximum continuous transmit time (time-
out timer)
Off, 3, 5, 10, 20, 30 [min]
Off
6-03
TX Inhibit
Transmit inhibit
Off, On
Off
6-04
Transmit Power Step Size
Step size in W to increment or decrement
the transmit power
1 or 5 [W]
5 W
Filter
6-05
TX Filter Numbers
The number of transmit filters
2, 3
3
6-06
RX Filter Numbers
The number of receive filters
2, 3
3
6-07
Filter Control in SSB Mode (High/Low
and Shift/Width)
Toggling the filter type between the
high-cutoff and the low-cutoff, and the
frequency type between the width and the
shift for use in SSB mode.
High & Low Cut, Shift &Width
High & Low
Cut
6-08 Filter Control in SSB-DATA Mode (High/
Low and Shift/Width)
Toggling the filter type between high-cutoff
and low-cutoff, and the frequency type
between width and shift for use in SSB-
DATA mode.
High & Low Cut, Shift &Width
Shift & Width
6-09
VOX Voice Delay (Microphone)
Voice Delay Time (Microphone) while the
VOX is active
Off, Short, Medium, Long
Medium
6-10
VOX Voice Delay (Except Microphone) Voice Delay Time (other than for the
microphone line) while the VOX is active
Off, Short, Medium, Long
Medium
Rear Connectors (Group 7)
Menu
Display
Configuration
Range
Default
Reference
Page
Baud Rate
7-00
Baud Rate (COM Port)
Baud Rate for the COM connector
4800, 9600, 19200, 38400,
57600, 115200 [bps]
9600 [bps]
16-10
7-01
Baud Rate (USB Port)
Baud Rate for the USB port
4800, 9600, 19200, 38400,
57600, 115200 [bps]
115200 [bps]
16-10
Data Transfer
7-02
Quick Data Transfer
Quick Data Transfer
Off, On
Off
7-03
Overwrite Location (Quick Data Transfer) The location where the split operation
status is overwritten
VFO, Quick Memory
Quick
Memory
7-04
Overwrite Location (DX PacketCluster
Tuned Data)
The location where the packet cluster
tuned data is saved
Operating Band, Sub Band
Sub Band
Audio Input
7-05
USB: Audio Input Level
Input level of the USB audio
0 to 100 (in steps of 1)
50
16-21
7-06
ACC 2: Audio Input Level
Input level from the ACC2 connector
0 to 100 (in steps of 1)
50
7-07
Optical: Audio Input Level
Input level for the audio signal from the
OPTICAL IN connector
0 to 100 (in steps of 1)
50
Audio Output
7-08
USB: Audio Output Level (Main Band)
Output level of the main band audio signal
from the USB connector
0 to 100 (in steps of 1)
100
16-21
7-09
USB: Audio Output Level (Sub Band)
Output level of the sub band audio signal
from the USB connector
0 to 100 (in steps of 1)
100
16-21
7-10
ACC 2: Audio Output Level (Main Band) Output level of the main band audio signal
from the ACC 2 connector
0 to 100 (in steps of 1)
50
7-11
ACC 2: Audio Output Level (Sub Band) Output level of the sub band audio signal
from the ACC 2 connector
0 to 100 (in steps of 1)
50
7-12
Optical: Audio Output Level (Main Band) Output level of the main band audio signal
from the OPTICAL OUT connector
0 to 100 (in steps of 1)
100
7-13
Optical: Audio Output Level (Sub Band) Output level of the sub band audio signal
from the OPTICAL OUT connector
0 to 100 (in steps of 1)
100